If your USB-C port is loose and it isn’t working, you need to fix it immediately. However, the steps to fix it are not very obvious, so, in this article, we will go through the steps on how to fix a loose USB-C port that’s not working.
A loose USB-C port can be a pain. Most of the time the ports are loose because of a design flaw by the manufacturer. Not all manufacturers have the same tolerances, so you may not have to follow the same steps.
While USB-C ports may be the future, some of us have been left with USB-A ports on our laptops and desktops. These ports are much more dependable than their newer counterparts and the good news is that you can use these USB-A ports with your USB-C devices. However, if you find that your USB-C device is not working, you may have a loose port that can easily be fixed with a few simple steps.
How To Fix A Loose USB-C Port That’s Not Working (STEPS)
The USB-C port has become one of the most popular ports in the market. It is a standard port that connects the devices to the computer. So, if your USB-C port is not working, it may be because of several reasons like an incorrect connection, improper power supply, or damaged cable.
What Is A Loose USB-C Port?
A loose USB-C port is not connected to the USB-C port. If you are not using any device then the USB-C port is not used. When the USB-C port is loose, it will cause some problems to the devices.
What To Do If Your USB-C Port Is Not Working
Check The Power
You should check if the power of your laptop is sufficient for the port to work or not. If you don’t find any problem with the power then it will be a clear indication that the port is working fine.
If you find some problem with the power then you need to check the voltage level and current of the power source. You can check this by using a multimeter and it will tell you the voltage and current of the power source.
Check The Port
The next step is to check if the port is working properly or not. You need to unplug the device from the port and plug it back in after 10 seconds. If it is working fine then you need to check if the port is loose or not.
Fix The Port
If the port is loose, then you need to tighten the screws of the port.
How To Fix A Loose Usb-c Port?
It is easy to fix a loose USB-C port. All you need is a simple tool that can be purchased from the local market for less than $20. The tool is a screwdriver and the name of the tool is a USB-C connector repair kit.
Step By Step Guide On How To Fix A Loose Usb-C Port
First, you need to take the tool and insert the tip in the loose USB-C port. You need to make sure that the loose USB-C port is not connected to anything else. If it is connected to the laptop or something else then you should remove it.
Now, you need to turn the screwdriver in one direction and then try to pull it out. Once you are able to pull the tool out, then you are done with the first step.
Now, you need to repeat the same process again. If you are able to pull the tool out, then you can connect it to another loose USB-C port. But if you are not able to pull the tool out, then you need to repeat the entire process again.
So that was all about our article on “How to Fix a Loose USB-C Port that’s Not Working (STEPS)”. We hope that you were able to follow the steps in this blog and were able to fix the loose USB-C port on your laptop. If you were able to do so, please leave a comment below telling us how it went!
The best way to keep your computer in good condition is to keep all of the components clean. The port is no different. There is a way to clean your USB-C port, we recommend using compressed air to clean out the port. You can also use a cotton swab with rubbing alcohol or a cotton swab with isopropyl alcohol. Be sure to replace the rubber gasket on the bottom of the port when cleaning.
If you’d like to see some other blog posts similar to this one, please let us know by commenting below. Thank you for reading, we are always excited when one of our articles is able to help someone out!